Charge controller PWM 20 A, 12/24 V

Category:

Description

Specifications:

Charge Algorithm: PWM (4 stages)
The maximum current of solar batteries, A: 20
Maximum load current, A: 20
Load switch: yes (button and timer)
System voltage, V: 12/24 (automatically)
Temperature Compensation: Programmable (-3mV / oC @ 2 V), active only with the TS-R Remote Temperature Sensor connected
Remote temperature sensor: option (TS-R)
Battery type selection: yes (AGM / GEL / Flooded / User), selection via MT-50 panel or USB-RS485 cable
Own consumption, mA: 8.4
Load shedding voltage, V: 11.1 (22.2), programmable
Load connection voltage, V: 12.6 (25.2), programmable
Digital display: no
Maximum cross-section for connected wires, 10mm2
Operating temperature range, oC: -35 … + 50
Humidity (non-condensing): 10 … 95%
Dimensions, mm: 160 x 81 x 48
Weight, kg: 0.30

Description:

The system voltage (12 or 24 Volts) is automatically selected by the controller based on the voltage measurement of the connected batteries. The voltage of the solar panels connected to the controller must be equal to the voltage of the connected battery (i.e., you cannot, for example, use a solar battery with a voltage of 24 V to charge a 12 V battery). This is a feature of all PWM-type charge controllers.
This model of the charge controller supports working with solar panels with power up to 300 watts at a voltage of 12 volts or up to 600 watts at a voltage of 24 volts.

Suppliers:

HOMSOL CJSC “Unitech” LLCGreen Technologies”  JSCSystem automation