Monocrystalline solar panel 12 Volt, 50 W

Category:

Description

Specifications:

Item Type: Silicon Monocrystalline
solar cells 125×62 mm.
Number of elements and compounds: 36 (4×9)
Element Efficiency (Efficiency): 18.31%
Maximum power under standard conditions (STC), W: 50
Open Circuit Voltage (Voc), V: 22.35
Short Circuit Current (lsc), A: 2.95
Voltage at maximum power point (Vmp), V: 18.10
Current at the point of maximum power (lmp), A: 2.76
The size of the solar module, mm .: 540 x 630 x 30
Weight, kg: 4.1
Operating temperature: -40 ° C to + 85 ° C
Output Contact Type: Sealed Junction Box
Cable type: without cable
Cable Connector Type: Solder Contacts

Description:

The monocrystalline solar panel is suitable for charging phones or powering a laptop or TV if they are rated for 12 volts. To do this, you will need to add a charge controller and a battery to the accumulator.

And adding a device called an inverter to the controller and the battery, you will get an alternating voltage of 220 Volts and you can use any small electrical appliances.

The solar panel has a relatively small size and is made in a durable aluminum frame with structured tempered glass. A protective diode is installed in the junction box located on the back of the solar battery to protect the elements from partial shading.

On a sunny day, this battery will produce about 250 watts * hour of electricity.

Suppliers:

HOMSOL CJSC “Unitech” LLCGreen Technologies”  JSCSystem automation